Fuel Tank Accessories

RDS Auxiliary Fuel Tank Installation Kits let you quickly and easily connect your auxiliary fuel tank to your diesel pickup truck’s fuel system. To make the most of your RDS auxiliary fuel tank, install kits from RDS are proudly made in the USA and...

All Hoses and Hardware Included Some Cutting May Be Required On The OEM Fuel Filler Hose/Neck Designed To Work With A 3/8in NPT Female Tank Mounted Drain Fitting A Shut-off Valve Is Built Into The Included 3/8in Mail Drain Fitting If Shut-off Valve is...

1.0" Adapter to splice into filler tube for gasoline.

Transfer Flow Fuel Tank Accessories and Required Installation Kits.  

Required for some 2008 through 2010 Ford pickup trucks when installing a TITAN fuel tank.On a few vehicles the existing fuel lines come up approximately 6 inches short.This kit extends the suction and the return lines up to 18 inches and...

LB7 Kit - CompleteRequired on all 2001 to 2003 General Motors trucks. On 2004 models it is required if the eighth character in the VIN is a 1 .  

Mechanical Fuel Meter 4 Digit by GPI Mechanical Fuel Meter with Strainer for gallons with 3/4 inch NPT inlet/outlet. UL Listed. 4 - 20 GPM (15-75 LPM). 4 Digit display. 50 PSIG/3.4 bar. Note: Not compatible with Manual Pumps Model FM-200-G6N Inlet...

This kit allows the TITAN Crew Cab, Long Bed - Super Series Oversized Fuel Tank (7020308) to be mounted into the 2008-2010 F450, Long Bed truck. The tank CAN be mounted in the truck WITH the extruded aluminum carrier bearing bracket. Kit must be used...

Vented lockable refueling cap w/ neck comes standard with all refueling tanks

Dual-Flo piston design creates flow on both the push and pull strokes to maximize flow rates Pump delivers up to 50 gallons per 100 stroke cycles (push/pull) Versatile 2-position handle is ideal for both high-flow and low-flow applications, allowing...

Removes rust, dirt and dust from contaminated fuel to protect your equipment. 10 micron nominal filtration, 18 GPM/67 LPM, 1-inch - 12 UNF threads. Designed for fuel transfer pumps, fuel dispensers & gravity flow applications. Perfect for above-ground...

Extremely lightweight design for use on small tanks and barrels Designed for permanent mounting on vented storage tanks For use with gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% bio-diesel blends such as B20) and kerosene ...

Lockable Automotive Style Cap for Auxiliary Fuel Tanks. Keyed Fuel Cap that keeps your fuel safe and secure. This locking fuel cap comes with a set of 2 keys. A great addition to your ATI Auxiliary Fuel Tank. Can be used with both Gasoline...

1.5" Adapter to splice into filler tube for diesel

Vented lockable refueling cap w/o neck Cap with Neck is pictured this Part Number is for the Cap Only Not the Threaded Neck Shown Attached to the Cap

Designed for permanent mounting on vented storage tanks Includes manual unleaded nozzle 3/4in. x 10ft. hose, 18ft. 12/2 AWG power cord Two-piece adjustable suction pipe (15in. to 40in) For use with gasoline (up to 15% alcohol blends such as E15),...

Designed for permanent mounting on vented storage tanks Includes automatic unleaded nozzle 3/4in. x 12ft. hose, 18ft. 12/2 AWG power cord and two-piece adjustable suction pipe (15in. to 40in) For use with gasoline (up to 15% alcohol blends such as...

Dual-action piston design pumps fluid on both the push and pull stroke to increase fluid dispensing rates and reduce operator fatigue For use with diesel (diesel blends to B20), gasoline (alcohol blends up to E10), kerosene, light oil (up to 10W) and...