Free Ground Shipping
Free ground shipping on all orders, Continental US
We know our products
Store Locations in NC, SC, TN, VA, and WV
Always the correct part
XT1200 TruckSlide Mid-Size Pickup and Jeep Pull-Out Cargo Tray
XT1200 For Jeep Gladiator and Mid Size Pickups
MSRP: $1,799.95 - $2,199.95$1,499.95 - $1,799.95(You save $300.00 )
- No Welds, Joints, or Seams to Fail
- 1200 lb Capacity
- 70% Extension
- Lifetime Warranty
Features and Specifications:
- Mid-Sized Pickups and Jeep Gladiator
- 1200 lb. capacity
- 1/8 fully-formed aluminum tray with no welds or weak points
- 5-inch tall sides with tie-down holes and slots
- Two 10 gauge galvanized steel tracks
- E-Track Accessory Ready
- 1/4-inch steel pull handle and safety locking plungers
- 12 chrome steel sealed bearings
- 1/2-inch 302 stainless steel springs slam-shut plungers into track safety locking points
- Lifetime Warranty
- Made in The USA
Have a Full-Sized Truck? Find Your XT1200 Truckslide Here.
The industrial strength Highway Products Truckslide XT1200 is engineered to transport up to 1,200 lbs. It may be able to carry more than your truck, so be cautious.
Unlike some bedslide and cargo slides, the tray is not a fabricated piece—no plywood or composites with bolted or welded on side rails. The XT1200, just like its companions, the XT2000 and XT4000, has a solid, formed piece of thick aluminum. No weak points to fail and no welds to crack. Also, full-size truck trays are 49-inches wide, so you can carry 4'x8' sheets of plywood or 48-inch pallets without having to angle them up on one side of the tray as you would with a 48-inch tray, and the 5-inch tall side rails have multiple hex holes and slots for tie-down straps.
The XT1200 extends to 70% of its length, which means anything you are carrying will be within reach. The 1/4-inch pull-handle releases the slide and also locks the slide in place at 10-inch intervals with powerful 1/2-inch 302 stainless steel springs.
Check for a Leonard Truck Accessories Retail Store Near Me in North Carolina, South Carolina, Tennessee, Virginia, and West Virginia.
- 0.00 LBS
- Free Shipping
- 1200 lbs
- Silver or Black
- Country of Origin:
In 1980, over 30 years ago, we first opened our doors at Highway Products, Inc. We soon found out the hard way that no matter what we do or how hard we try, sometimes a part gives up prematurely. And, that even the best engineering fails on occasion and in certain situations. We also found out, to our surprise, we're human! We found out that you, our customers, are very smart and realize everyone makes mistakes. But first, you were most interested in how our products performed. And second, if there was a problem, how are WE going to handle it?
So we decided to take the pressure off our valued customer and put it where it should be, ON US! Thus, we are giving our customer a simple "Lifetime Warranty". No fine print to read, hidden rules or warranty cards to fill out, and no receipts needed for returns or service. So, if this is your first purchase from Highway Products, Inc., please read and believe the following: If we make a mistake, it will be our goal to fix or replace any defective products as fast as possible and Make You Happy!
All of our standard products come with a Lifetime Warranty against defects in workmanship. One of the reasons we can offer Lifetime Warranties on our standard products is because we've witnessed many years of product abuse and used this information to continually improve these products. As well, we also promise to do our best to give you the same warranty for custom products we make just for you. Highway Products is the largest custom tool box manufacturer on the planet and we build these boxes by the thousands. Our custom products are designed by our top level engineers, so you get the best we can give.
Your warranty will include locking mechanisms, hinges, gas props, weather strip, and most other materials we use. And, we'll give you free tech support on any problem you have. Plus, we'll replace lost keys, free. Naturally we cannot cover things like paint chips, light bulbs, abuse, minor adjustments that you can easily make yourself, and normal wear and tear.
If the product you bought from Highway Products does not meet your expectations, we want to know so we can help you with it and make it better. All our products are a "Work in Progress", meaning, we are continually changing and improving them. Mostly, product improvements come from our customers suggestions!
Custom made products are not easily resellable. Unless we goofed on something, we cannot normally give refunds. To avoid any problems on custom products, we'll create a product drawing for you to look at, make changes if necessary, and get your approval before we start production. We've found this proven method rarely has problems. If you need large quantities, we'll build you the first one (first article) and send it to you, before we start production. This will insure that you get what you expected.