Tank/Toolbox Measurements in Inches
| TTL50CB |
"L" |
47 Gal |
8 |
36.25 |
30 |
19 |
8 |
11 |
22 |
| TTL95CB |
"L" |
95 Gal |
9 |
48.50 |
33 |
26 |
11 |
17 |
22 |
| TTR65CB |
Rect |
62 Gal |
19 |
60 tapers to 54" |
21 |
47 |
6 |
n/a |
n/a |
| TTR58CB9 |
Rect |
58 Gal |
22 |
58 notched to 51" |
21 |
42 |
9 |
n/a |
n/a |
| TTR58CB |
Rect |
58 Gal |
19 |
58 notched to 51" |
21 |
42 |
6 |
n/a |
n/a |
| TTR42CB |
Rect |
42 Gal |
21 |
48.50 |
19 |
36 |
9 |
n/a |
n/a |
| TTL95SCB |
"L" Split |
92 Gal |
9 |
48.50 |
33 |
26 |
11 |
17 |
22 |
- Similar Capacity Tanks Have Different Shapes; Review Each Before You Decide.
- TTL95SCB is a split tank. Dual fuel capable 46 gallons each half; For Split tanks without a toolbox go here.
- We're sorry we don't have pictures of the black tanks.
- "Custom Colors, Sizes, and Configurations Possible Call For Quote"
Measure Your Bed: MEASURING FOR A BED MOUNTED TRANSFER OR AUXILIARY TANK
Features:
- Special Permit issued by the US Department of Transportation
- Legal for Gas , Diesel, Methanol, Kerosene, Aviation fuel and other liquids
- Commercial grade lockable vent/prevent filler capCommercial Grade Lockable Fill Cap
- Fully baffled to reduce movement of contents
- Two-2" npt reinforced bungs for superior strength
- 3/8" npt drain
- Hold down brackets
- Pressure and leak detection test
- Clean and free of debris inside and outside of the tank
- 1 year limited warranty
DOT-DOT-DOT - Not all tanks are designed for flammable liquids such as gasoline; many that are "so-called" transfer tanks are only good for non-flammable liquids. ATI refueling transfer tanks are designed and constructed to comply with DOT specifications. ATI explains the advantage clearly here:
The Department of Transportation allows companies to build "transfer tanks" to transport diesel and other non flammable liquids. There are design specs they must follow in order to be compliant. The DOT wrote the specifications that need to be followed, but it is up to the manufacturer to be compliant. In other words, the DOT does not usually check their design or type unless there is an accident. So it is legal to fill and transport non flammable liquids using a "transfer tank" but only privately, they're not for use in many circumstances. Now if there is an accident, the end user and the manufacturer can be investigated for compliance. Refueling tanks under this special permit are different and here's how. First, the design, construction, materials, justification, among other things are reviewed by the DOT and approved if they so determine. The manufacturer is required to demonstrate that the special permit achieves the level of safety required. Second, it's designed for use with flammables such as gasoline. Third, you can pump from it, legally, whether it's private, commercial, state or otherwise without removing the tank from your vehicle.
Bottom Line - DOT certification protects you in the event of an accident. Whether you are a farmer, contractor, municipality, or simply a private citizen, you can trust that your ATI tank will hold up. All of ATI's tanks are manufactured in the USA, nothing is outsourced. ATI refueling tanks are legal in all 50 states for gasoline, kerosene, methanol, diesel, and aviation fuel.*
*Local ordinances may apply, so protect yourself and check with your state, county or minicipality for specific guidelines.
Just To Be Clear - The tanks listed here are considered transfer tanks. Since the name is a little ambiguous, in the fuel tank world, a "Transfer Tank" is one that's used with a pump attached to fuel equipment or vehicles other than the vehicle carrying the tank. However, there's no rule against refueling the truck carrying the tank. The main thing is that the tank is not part of the truck's own fuel system. Tanks that are integrated into the truck's factory fuel system are called generally referred to as "Auxiliary Tanks". ATI does make Auxiliary Tanks and are listed that way here .
Ready To Work - All ATI refueling tanks come standard with a 3/8"npt drain plug, two 2" npt bungs (so you can mount your pump on either side), a locking cap, and fully welded baffles to reduce slosh and add strength. These tanks are constructed from rugged diamond plate aluminum and are all available with an extra cost powder coated finish. Standard tanks can handle a pump assembly up to 30 lbs.
You Have a Little Work To Do - ATI offers many different configurations, capacities, and shapes but measuring the area you intend to mount your tank is the only way to correctly choose the right tank for your truck. Use our guide "How to Measure Your Truck Bed for a Transfer or Auxiliary Tank"
Refueling Tank and Toolbox combos are great, secure solutions for tool and equipment storage as well as on the go fueling!
The toolbox features:
- All polished aluminum DP body construction
- Polished industrial stainless locking handles
- Automotive style gas shocks for lid
- Extreme 3 layer lid design
- Full aluminum piano hinge
- Aero-beveled lid design
If you cannot find a fit for your truck or have any other questions please contact us for help.
What You Need To Know:
Warning: Cancer and Reproductive Harm. - For more information, visit
