Roll over to zoom in
General Image
  • Best Price Guarantee

    We promise you will get the best price

  • In-House Experts

    We know our products

  • Installation Available

    Store Locations in NC, SC, TN, VA, and WV

  • Guaranteed Fitment

    Always the correct part

Warning Warning: Cancer and Reproductive Harm. For more information, visit www.P65warnings.ca.gov

White Night Back Up Lights Receiver Mount

Overstock SALE - Replaces Your Ball Mount on 1.25 or 2 Inch Hitches

General Image
$69.95
$49.95
(You save $20.00 )
SKU:
12324
Weight:
5.00 LBS
$69.95
$49.95
(You save $20.00 )
  • Unique rear lighting system
  • Optional Plug N' Go Wiring Adapter for 7-pin trailer outlets
  • Two powerful 55 watt high output halogen lamps
  • Activates automatically when vehicle is in reverse

Back Up Lights Receiver Mount by White Night

  • Mounts in Receiver - Must be Removed to Tow
  • Splicing Into Truck Wires Required
  • Two powerful 55 watt high output halogen lamps
  • Activates automatically when vehicle is in reverse
  • Produces 130,000 candlepower of light
  • Toggle switch on unit allows manual operation
  • Sturdy high impact case
  • Easy to install and compact in size
  • Product is 15.5" across - 4.5" High - 4" at Widest Point
  • No drilling required

Reverse Lighting receiver mount by White Knight. This unit is designed to be used with the typical 2" or 1 1/4" receiver type trailer hitches. It uses a 2" (Part Number 4198) or 1 1/4" (Part Number 4197) stainless steel tube mount that slides into the hitch receiver and is secured with a common 5/8" hitch pin (pin not included). There are 2 pin holes in the mount to allow adjustment in and out of the receiver. The mount also allows adjustment up and down to enable installing the unit as close to the bottom of the bumper as possible. Removal is necessary to install your ball mount for towing. There is a wiring quick disconnect for easy removal of the light when ball mount installation is needed.

Add Options To This Order and Save:

NOTE:

  • All light units have a 3 position toggle switch on the back which allows for 3 modes of operation. In one position the light unit is automatically activated when the vehicle is placed in reverse. Center position is off. The 3rd position allows manual operation.
  • Product is 15.5" across - 4.5" High - 4" at Widest Point

Installation Tips:

  • There is a 3 position switch at the back of the White Night Assembly.  If your White Night does not light but it's installed correctly check the switch positions.  Centered is off, call it position 2.  The other two positions are, lights on when in reverse key on, call it position 1, and lights on when not in reverse, call it position 3.  On a hard wire installation the lights will be activated if the vehicle is off in position 3. NOTE: some factory 7 pin installations may require the key to be turned to the ON position or in ACCESSORY mode in order to activate the lights when not in reverse.
  • On factory installed trailer wiring check to make sure your fuse is installed.
  • For hard-wire installations the White Night will not work unless the red wire is connected to a 12V source either constant 12V or Ignition On 12V. Wiring to a constant 12V source will allow you to turn the White Night System on at any time without the vehicle key or ignition being on.
SKU:
12324
Weight:
5.00 LBS
Free Ground Shipping*
Installation Available
Secure Shopping
30-Day Returns