Customers Also Viewed
We promise you will get the best price
We know our products
BOLTS-ON To Factory Mounting Points (see note below)
NO DRILLING REQUIRED (racks without tracks)
Rust Free, Lightweight, All Aluminum Design
Aerodynamic Design Produces Minimal Vibration And Wind Noise
Designed To Fit Your Ford Transit ConnectVan
Stainless Steel Hardware
Extruded Aluminum Reinforced Cross Bars
Built-in channels on the cross bars for additional accessories
Part Numbers ending in 'B' are black, 'S' are Silver and ending in 'W' are white.
J1000 (end caps only) and J2000 (with accessories) Aluminum rack comes in 2 or 3 bar configurations
Rack Capacities and Included Accessories
|Part Number||Bars||End caps||Side Supports||Ladder Stop(s)||Strap(s)||Capacity (lbs.)||Drilling Required|
|J1065||2 (50")||4||None||None||None||500||Yes (includes tracks)|
|J1075||2 (55")||4||None||None||None||600||Yes (includes tracks)|
|J2065||2 (50")||None||4||1||1||500||Yes (includes tracks)|
|J2075||2 (55")||None||4||1||1||600||Yes (includes tracks)|
|J4065||2 (50")||None||Rails||1||1||500||Yes (includes tracks and side bars)|
|J4075||2 (55")||None||Rails||1||1||600||Yes (includes tracks and side bars)|
The Vantech J-Series Rack Systems are designed to accept a variety of accessories. The J1000 system with just the plastic end caps are ready for you to add your choice of compatible accessories. J1000 racks Systems, with end caps only, are a common choice for carrying kayaks, canoes, and cargo baskets or carriers.
The J2000 Rack systems come with accessories (hook and loop strap(s), ladder stop(s), ladder stop(s) end stops) included and are the common choice for commercial users carrying ladders, conduit, pipes or lumber, for example.
Note: 3 bar J2000 systems include 2 ladder guides and 2 straps.
NOTE : J-Series rack for the 2010-2013* Ford Transit Connect is available in 2 styles. If you wish to extend the distance available between the bars using just factory mounting points purchase H2166 2 Bar racks that include mounting tracks in the price. These tracks do require drilling to install on your Transit Connect but they will allow the rearward rack to extend further towards the end of the roof.
*2014+ Transit Connects use factory mounting points and DO NOT require additional tracks for full length fit..
Transit Connects built up to 2013 can only accomodate 2 bar rack systems but the Transit Connects built after 2014 have 3 bar rack systems available.
J-Series Rack System Specs:
4" Wide, 1/8" Thick, Bolt-On Mounting Bases
Heavy Duty 1/8" Thick Mounting Bases
50" x 2.25 x 1 or 55" x 3" x 1.5" Cross Bars
Built-In Channels (top and bottom) On The Cross Bars For Additional Accessories
2 x .75" Eyehooks Per Mounting Base For Easy Tie Down
50" or 55" Long Cross Bars