Light up the night with 4800 Lumen of LED brightness. Great for driveways, backroads, walkways, and outbuildings or anywhere more than just a little light will do. Self contained, no wiring required, waterproof and weatherproof, pole or hard surface mount. Motion sensing and the remote control allows you to change settings without climbing ladders.
Specifications:
- LED type: SMD2835
- LED Qty: 90
- Color Temperature: 6,000K
- LED Max Lumens (lm): 4800
- LED Standby Lumens (lm): 1400
- Solar Panel: Monocrystalline 21W
- Solar Panel Charge Time: 8-10 hours @ full sun=
- Remote Control: Yes
- Night Sensor: Yes
- Motion Sensor: Yes
- Detection Angle: 120°
- PIR Sensor: 25-40 feet at 120°
- Beam Angle: 140° x 70° TPIII
- IP65 Rated Waterproof
- Certifications: CE, RoHS, BSCI
- Battery: Rechargeable LiFePO4
- Battery Specs: 12.0Ah, 9.6V 32650
- Run Time: 3+ Full Nights on a single charge
- Protections: Over-Charge and Over-Discharge
- Working Temperature: -20°C to 60°C (-4°F to 140°F)
- Composition: Polycarbonate & ABS UV coated Case
- Mounting: Wall/Pole
- Mounting Hardware: Included
- Install Height: 9-19.5 feet
- Dimensions (LxWxH): 28.0 x 11.3 x 3.0 (inches)
- Weight: 12.8 lbs.
- Warranty: 1 year
Quick Use Instructions:
Mode A: Constant Lighting Mode:
- Press Constant Lighting Mode
- Press Desired Time Setting
- Press Desired Brightness Setting
- Light will flash after each button press to indicate setting has been accepted
Mode A Example:
- Press Constant Lighting Mode
- Press 2H Time Setting
- Press 80% Brightness Setting
- Light will stay on, at dark, for 2 hours at 80% brightness
Mode B: Sensor Mode:
- Press Sensor Mode
- Press Desired Brightness Setting
- Light will flash after each button press to indicate setting has been accepted
Mode B Example:
- Press Sensor Mode
- Press 60% Brightness Setting
- ight will turn on at 60% brightness when motion is detected, then drops to 30% of 60% brightness after 20 seconds of no motion detected.
- *Note: The "Switch Confirm" button is not needed nor does it have a function in programming. The setting confirmation is when the light itself flashes.
